242 Upgrade and Maintenance Manual
RX200 S8
Optical disk drive
12.3.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
Ê "Verifying and configuring the backup software solution" on page 75
12.4 Replacing the ODD
12.4.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Removing backup and optical disk media" on page 66
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
12.4.2 Removing the defective ODD
Ê Remove the ODD as described in section "Removing the ODD" on
page 240.
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: tool-less
To Next Page
Loading...
Need help?
General