302 Upgrade and Maintenance Manual
RX200 S8
System board and components
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Verifying system information backup / restore" on page 73
15.5.3 Replacing the onboard SAS enabling key
15.5.3.1 Preliminary steps
Ê "Locating the defective server" on page 43
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
Ê "Removing the air duct" on page 62
15.5.3.2 Replacing the onboard SAS enabling key
Ê Remove the defective onboard SAS enabling key as described in section
"Removing the onboard SAS enabling key" on page 301.
Ê Install the new onboard SAS enabling key as described in section "Installing
the onboard SAS enabling key" on page 299.
15.5.3.3 Concluding steps
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
Need help?
General