Fujitsu PRIMERGY RX200 S8 User Manual

RX200 S8 Upgrade and Maintenance Manual 233
Processors
11.4.3 Installing the new heat sink
I Processors with 135W need dedicated heat sinks (part number V26898-
B964-V3).
Ê Install the heat sink as described in section "Installing the heat sink" on
page 219.
11.4.4 Concluding steps
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58

Fujitsu PRIMERGY RX200 S8 Specifications

General

Number of Processors	1 or 2
Chipset	Intel C602
Operating System Support	Windows Server, Linux, VMware
Form Factor	Rack-mountable
Processor	Intel Xeon E5-2600 v2
Memory	Up to 768 GB
RAID Support	RAID 0, 1, 5, 6, 10
Storage	Up to 8 x 2.5-inch or 4 x 3.5-inch HDD/SSD
Network Interface	2 x 1 GbE onboard, optional 10 GbE