Fujitsu PRIMERGY RX200 S8 - Basic Information

196 Upgrade and Maintenance Manual RX200 S8
Main memory
10.1 Basic information
Figure 132: Slots of the main memory
– The system board is equipped with 24 memory connectors
(12 connectors per CPU).
– In mono processor configurations only 12 memory connectors are usable.
– The system has to be equipped with at least one memory module per
processor.
– Supported capacities: 4 GB, 8 GB, 16 GB, 32 GB or 64 GB
– Maximum amount of RAM: 1536 GB
INDICATE
CSS
Battery
CPU 2 DIMM 3F
CPU 2 DIMM 2F
CPU 2 DIMM 1E
CPU 2 DIMM 2E
CPU 2 DIMM 3E
CPU 2 DIMM 1F
CPU 2 DIMM 1G
CPU 2 DIMM 2G
CPU 2 DIMM 3H
CPU 2 DIMM 2H
CPU 2 DIMM 1H
CPU 2 DIMM 3G
CPU 1 DIMM 1A
CPU 1 DIMM 2A
CPU 1 DIMM 3B
CPU 1 DIMM 2B
CPU 1 DIMM 1B
CPU 1 DIMM 3A
CPU 1 DIMM 3D
CPU 1 DIMM 2D
CPU 1 DIMM 1C
CPU 1 DIMM 2C
CPU 1 DIMM 3C
CPU 1 DIMM 1D
1
CN101
J9
SMB
SAS
Front
VGA
BP
PWR
Front LAN M
CPU 2
CPU 1
FAN 9/10 SYS
FAN 7/8 SYS
FAN 5/6 SYS
FAN 3/4 SYS
FAN 1/2 SYS
Slot riser card / slot 4
1
SKU Key