Fujitsu PRIMERGY RX200 S8 - Concluding Steps; Removing an Expansion Card - Slot 4; Preliminary Steps; Removing the Expansion Card - Slot 4

162 Upgrade and Maintenance Manual RX200 S8
Expansion cards and backup units
9.4.3.4 Concluding steps
Ê "Installing the riser module 1" on page 59 or "Installing the riser module 2"
on page 60
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
9.4.4 Removing an expansion card - slot 4
9.4.4.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
Ê "Removing the riser module 3" on page 60
9.4.4.2 Removing the expansion card - slot 4
Ê If necessary, disconnect the cables from the expansion card.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less