Fujitsu PRIMERGY RX200 S8 - Installing the New Memory Module; Concluding Steps

RX200 S8 Upgrade and Maintenance Manual 209
Main memory
10.4.3 Installing the new memory module
Ê Install the memory module as described in section "Installing a memory
module" on page 206.
10.4.4 Concluding steps
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Updating or recovering the system board BIOS and iRMC" on page 70
Ê "Enabling replaced components in the system BIOS" on page 79
Ê "Verifying the memory mode" on page 79
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83