Fujitsu PRIMERGY RX200 S8 - Removing a Memory Module

RX200 S8 Upgrade and Maintenance Manual 207
Main memory
10.3 Removing a memory module
10.3.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
Ê "Removing the air duct" on page 62
10.3.2 Removing a memory module
Figure 136: Removing the memory module
Ê Press the securing clips on both sides of the memory slot concerned
outward (1).
Ê Pull the memory module out of the slot (2).
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less