Fujitsu PRIMERGY RX200 S8 - Removing the Front VGA and;or Front LAN

254 Upgrade and Maintenance Manual RX200 S8
Front panel and front VGA/LAN module
13.3 Removing the front VGA and/or front LAN
13.3.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
Ê "Removing the riser module 3" on page 60
13.3.2 Disconnecting the front LAN cable
Figure 185: Removing the front LAN card
Ê Press the two sides of the holder together (1) until the locking mechanism
disengages.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: tool-less