Fujitsu PRIMERGY RX200 S8 - Installing the ODD

236 Upgrade and Maintenance Manual RX200 S8
Optical disk drive
12.2 Installing the ODD
12.2.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
12.2.2 Removing the dummy module
Figure 164: Removing the dummy module
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: tool-less