RX200 S8
Upgrade and Maintenance Manual 153
Expansion cards and backup units
9.4.1.2 Removing the slot cover - slot 1-3
Figure 84: Removing the slot cover - slot 1
Figure 85: Removing the slot cover - slot 2 (1) and slot 3 (2)
Ê Pull out the slot cover of the corresponding slot.
V CAUTION!
Keep the slot cover for future use. If the expansion card is removed and
not replaced with a new one, the slot cover must be reinstalled due to
cooling, to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and to protect against fire.
To Next Page
Loading...
