206 Upgrade and Maintenance Manual
RX200 S8
Main memory
10.2.3 Installing a memory module
Figure 134: Opening the securing clips
Ê Press the securing clips on both sides of the memory slot concerned
outward.
Figure 135: Installing a memory module
Ê Carefully press the memory module into the memory slot (1) until the
securing clips on both sides of it engage (2).
10.2.4 Concluding steps
Ê "Installing the air duct" on page 62
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Updating or recovering the system board BIOS and iRMC" on page 70
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
To Next Page
Loading...
