278 Upgrade and Maintenance Manual
RX200 S8
Serial interface
14.4 Replacing the serial interface
14.4.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 64
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
14.4.2 Removing the defective serial interface
Ê Remove the serial interface as described in section "Removing the serial
interface" on page 276.
14.4.3 Installing the new serial interface
Ê Install the serial interface as described in section "Installing the serial
interface" on page 274.
14.4.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
To Next Page
Loading...
