272 Upgrade and Maintenance Manual
RX200 S8
Front panel and front VGA/LAN module
Ê Connect the front panel cable to the system board connector "Front Panel".
Ê If applicable, connect the front VGA cable as described in section
"Connecting the front VGA cable" on page 251.
Ê If applicable, connect the front LAN cable as described in section
"Connecting the front LAN cable" on page 251.
13.6.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Using the Chassis ID Prom Tool" on page 87
Ê "Switching on the server" on page 58
Ê "Verifying system information backup / restore" on page 73
Ê "Enabling BitLocker functionality" on page 83
To Next Page
Loading...
Need help?
General