EasyManua.ls Logo

Fujitsu PRIMERGY RX200 S8 - Basic Information

Fujitsu PRIMERGY RX200 S8
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
92 Upgrade and Maintenance Manual
RX200 S8
Power supply
6.1 Basic information
In its basic configuration the server is equipped with a hot-plug power supply
unit (450 W or 800 W), that adjusts automatically to any mains voltage in the
range of 100 V - 240 V. As an option, the power supply can be expanded with
an extra power supply unit to create a redundant power supply. If a power
supply unit fails, the redundant configuration assures continued operation. The
defective power supply unit can be replaced during operation (hot-plug).
There are two types of power supply units available:
450W power supply unit
800W power supply unit
Both power supply units must be of the same type.
Figure 22: PSU bays
PSU 1 PSU 2

Table of Contents

Other manuals for Fujitsu PRIMERGY RX200 S8

Related product manuals