262 Upgrade and Maintenance Manual
RX200 S8
Front panel and front VGA/LAN module
13.5.2 Removing the defective front LAN card
Ê Disconnect the front LAN cable as described in section "Disconnecting the
front LAN cable" on page 254.
13.5.3 Installing the new front LAN card
Ê Connect the front LAN cable as described in section "Connecting the front
LAN cable" on page 251.
13.5.4 Concluding steps
Ê "Installing the riser module 3" on page 61
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Updating the NIC configuration file in a Linux environment" on page 82
Ê "Looking up changed MAC / WWN addresses" on page 85
Ê "Configuring LAN teaming" on page 88
To Next Page
Loading...
