152 Upgrade and Maintenance Manual
RX200 S8
Expansion cards and backup units
9.4 Expansion cards and riser cards
9.4.1 Installing an expansion card - slot 1-3
9.4.1.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 63
Ê "Disabling SVOM boot watchdog functionality" on page 64
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
Ê Remove the corresponding riser module as described in section "Removing
the riser module 1" on page 58 or "Removing the riser module 2" on
page 59.
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Software: 5 minutes
Tools: tool-less