156 Upgrade and Maintenance Manual
RX200 S8
Expansion cards and backup units
Figure 90: Example : connecting NCSI cable to system board
Ê If necessary, connect the cables to the expansion cards and other
components.
I Connecting the NCSI cable is only necessary in order to use the
Modular LAN controller as a shared LAN interface, that allows both,
management and dedicated LAN connections.
9.4.1.4 Concluding steps
Ê "Installing the riser module 1" on page 59 or "Installing the riser module 2"
on page 60
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Updating RAID controller firmware" on page 73
Ê If applicable, "Enabling Option ROM scan" on page 74
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Enabling BitLocker functionality" on page 83
To Next Page
Loading...
