112 Upgrade and Maintenance Manual
RX200 S8
Hard disk drives / solid state drives
7.2.3 Installing the 2.5-inch HDD/SSD module
Figure 42: Unlocking the 2.5-inch HDD/SSD module
Ê Release the locking mechanism as follows:
1. Press the two green tabs of the locking lever together (1).
2. Push the handle of the HDD/SSD module fully in the direction of the
arrow (2). The HDD/SSD module is now unlocked.
Figure 43: Installing the 2.5-inch HDD/SSD module
Ê Carefully push the HDD/SSD module into the empty bay (1) until it stops.
Ê Push the handle completely (2) in the direction of the arrow until the locking
mechanism engages.
/
/
0
To Next Page
Loading...
