Fujitsu PRIMERGY RX200 S8 - Installing the Front VGA and;or Front LAN

246 Upgrade and Maintenance Manual RX200 S8
Front panel and front VGA/LAN module
13.2 Installing the front VGA and/or front LAN
13.2.1 Preliminary steps
Ê "Disabling BitLocker functionality" on page 63
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê "Getting access to the component" on page 47
Ê "Removing the riser module 3" on page 60
13.2.2 Removing the front VGA/LAN module
Figure 172: Removing the front VGA/LAN module
Ê Lift up the green touch point (1).
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools: tool-less