Fujitsu PRIMERGY RX200 S8 - Installing the Slot Cover; Concluding Steps

RX200 S8 Upgrade and Maintenance Manual 277
Serial interface
Figure 213: Removing the serial interface - slot 1
Ê Remove the serial interface from slot 1 or slot 2.
14.3.3 Installing the slot cover
Ê Install the slot cover of slot 1 or slot 2 as described in section "Installing the
slot cover - slot 1-3" on page 161.
Ê Install the riser module 1 or the riser module2 as described in section
"Handling riser modules" on page 58.
14.3.4 Concluding steps
Ê "Reassembling" on page 52
Ê "Connecting the server to the mains" on page 57
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83