Fujitsu PRIMERGY RX200 S8 - Page 197

RX200 S8 Upgrade and Maintenance Manual 197
Main memory
Figure 133: Supported memory modules
I For system relevant information, refer to your server’s hardware
configurator available online at the following address:
for the EMEA market:
http://ts.fujitsu.com/products/standard_servers/index.html
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
Voltage setting (BIOS)
CPU with 1600MHz DDR3 Bus
CPU with 1333MHz DDR3 Bus
1R - Single Rank 4R - Quad Rank
2R - Dual Ran
k
8R - Eight Ran
k
1DPC = 1 DIMM
p
er Channel
2DPC = 2 DIMM
p
er Channel
3DPC = 3 DIMM
p
er Channel
DPC
CPU with 1866MHz DDR3 Bus
1600 1333 1866 1600 1066 1333 1333 1866 1600 1066 1600 1600 10661866 - 1333 -
1333 1066
DPC DPC DPC DPC DPC
12
800
800
1223
13331333
Mem. Speed provided
by CPU
Real maximum memory-bus speed depending on CPU type, memory configuration (DPC)
and voltage setting (BIOS)
UDIMM 1866MHz RDIMM 1866MHz LRDIMM 4R 1600MHz
1.5V [default] 1.35V 1.5V [default] 1.35V 1.5V [default] 1.35V
23123123
1600 - 1333 -
1
1600 1333 1600 1600
DPC DPCDPCDPCDPCDPCDPC
331
DPC DPC DPC DPC DPC
1333 10663331008333133316601
1066 1333 1333 1600 1600 1066 1600 1600 1066
1333 - 1333 1333 - 13331333