226 Upgrade and Maintenance Manual
RX200 S8
Processors
Figure 156: Removing the processor
Ê Carefully remove the processor from its socket in a vertical motion.
V CAUTION!
Be careful not to touch or bend the spring contacts on the processor
socket.
Ê Thoroughly clean residual thermal paste from the processor surface using a
lint-free cloth.
Ê If the processor is being replaced during a CPU upgrade and may be reused
later, store it in a save place.
V CAUTION!
Processors are extremely sensitive to electrostatic discharge and
must be handled with care. After a processor has been removed from
its protective sleeve or from its socket, place it upside down on a
nonconducting, antistatic surface. Never push a processor over a
surface.
To Next Page
Loading...
