312 Upgrade and Maintenance Manual
RX200 S8
System board and components
Ê "Enabling SVOM boot watchdog functionality" on page 78
Ê "Switching on the server" on page 58
Ê "Enabling BitLocker functionality" on page 83
Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I Configuration of network settings should be performed by the
customer. For further information, please refer to section "Note on
network settings recovery" on page 304
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page 88
To Next Page
Loading...
