336 Upgrade and Maintenance Manual
RX200 S8
Appendix
Ê "Shutting down the server" on page 46
Ê "Disconnecting the server from the mains" on page 47
Ê Take the system down to its minimum startup configuration.
Ê "Connecting the server to the mains" on page 57
Ê Connect a keyboard, mouse and display to the server.
Ê "Switching on the server" on page 58
V CAUTION!
Since the fan module is not included in the minimum startup
configuration, the server must be shut down immediately after the
diagnostic process is complete (POST phase has been passed).
The minimum startup configuration must be used exclusively for
diagnostic purposes by maintenance personnel, never in daily
operation!
Cable Notes
Front panel cable
Power cable
Table 7: Minimum startup configuration - cables
To Previous Page
Loading...
