Fujitsu PRIMERGY RX2540 M1 - 7.3 Replacing SAS; SATA HDD; SSD backplanes

RX2540 M1 Upgrade and Maintenance Manual 125
Hard disk drives / solid state drives
Figure 31: Removing the 2.5-inch HDD from the 3.5-inch frame (B)
Ê Turn the installation frame round while holding the 2.5-inch HDD in place.
Ê Lift the 2.5-inch HDD out of the 3.5-inch HDD installation frame.
7.3 Replacing SAS / SATA HDD / SSD
backplanes
7.3.1 Replacing the 4x 3.5-inch HDD SAS backplanes
7.3.1.1 Preliminary steps
Ê "Locating the defective server" on page 51
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Shutting down the server" on page 53
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver