Fujitsu PRIMERGY RX2540 M1 - 9.8 DynamicLoM module

250 Upgrade and Maintenance Manual RX2540 M1
Expansion cards and backup units
9.8 DynamicLoM module
9.8.1 Basic information
I When replacing network controllers, network configuration settings in the
operating system will be lost and replaced by default values. This applies
to all static IP address and LAN teaming configurations.
DynamicLoM
module
Part number Bolt
length
Part number Fixation
DynamicLoM
metal bracket
with screw
M3x3.5
1Gb x2port S26361-D3245-
A100
5 mm C26192-Y1-
C65
C26361-B121-
C1
1Gb x4port S26361-D3255-
A100
5 mm C26192-Y1-
C65
C26361-B121-
C1
10Gb x2port
(SFP)
S26361-D3265-
A100
8 mm C26192-Y1-
C66
C26361-B121-
C1
10Gb x2port S26361-D3275-
A100
8 mm C26192-Y1-
C66
C26361-B121-
C1