Fujitsu PRIMERGY RX2540 M1 - Concluding Steps; Removing the Front VGA Connector; Preliminary Steps; Removing the Front Panel Module

RX2540 M1 Upgrade and Maintenance Manual 347
Front panel and external front connectors
13.3.1.6 Concluding steps
Perform the following procedures:
Ê "Installing the fan box" on page 156
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Enabling BitLocker functionality" on page 92
13.3.2 Removing the front VGA connector
13.3.2.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Ê "Removing the fan box" on page 154
13.3.2.2 Removing the front panel module
Ê "Removing the front panel module" on page 333
Field Replaceable Unit
(FRU)
Hardware: 10 minutes
Tools: Socket screw driver (5 mm)
hexagon SW5