Fujitsu PRIMERGY RX2540 M1 - Concluding Steps; Preliminary Steps; Replacing the SATA DOM

392 Upgrade and Maintenance Manual RX2540 M1
System board and components
14.5.3 Replacing the SATA DOM
14.5.3.1 Preliminary steps
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
14.5.3.2 Replacing the SATA DOM
Ê Remove the defective SATA DOM as described in section "Removing the
SATA DOM" on page 391.
Ê Install the new SATA DOM as described in section "Installing the SATA
DOM" on page 388.
14.5.3.3 Concluding steps
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Verifying system information backup / restore" on page 79
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less