14.6.3 Replacing the SD card
14.6.3.1 Preliminary steps
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
14.6.3.2 Replacing the SD card
Ê Remove the defective SD card as described in section "Removing the SD
card" on page 396.
Ê Install the new SD card as described in section "Installing the SD card" on
page 393.
14.6.3.3 Concluding steps
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Verifying system information backup / restore" on page 79
14.7 Replacing the system board
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less
Field Replaceable Unit
(FRU)
Hardware: 50 minutes
Software: 10 minutes
To Next Page
Loading...
