Fujitsu PRIMERGY RX2540 M1 - Installing a FBU; Preliminary Steps

RX2540 M1 Upgrade and Maintenance Manual 237
Expansion cards and backup units
Figure 137: FBU mounting positions
9.7.2 Installing a FBU
V CAUTION!
For further safety information, please refer to chapter "Important
information" on page 39.
9.7.2.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver
FBU1
FBU 2