Fujitsu PRIMERGY RX2540 M1 - 14.3 USB Flash Module (UFM)

RX2540 M1 Upgrade and Maintenance Manual 367
System board and components
Ê "Switching on the server" on page 67
Ê "Verifying system information backup / restore" on page 79
Ê "Verifying the system time settings" on page 88
14.3 USB Flash Module (UFM)
This section provides information on how to install, remove or replace the USB
Flash Module (UFM).
14.3.1 Installing the UFM
14.3.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Field Replaceable Unit
(FRU)
Hardware: 5 minutes
Software: 5 minutes
Tools: tool-less