Fujitsu PRIMERGY RX2540 M1 - Concluding Steps; Re-Installing the TPM; Removing the TPM

RX2540 M1 Upgrade and Maintenance Manual 387
System board and components
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Ê "Removing the fan box" on page 154
14.4.3.2 Removing the TPM
Ê "Removing the TPM" on page 381
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.4.3.3 Re-installing the TPM
Figure 264: TPM spacer
Ê The TPM spacer is already present on the system board.
Ê "Installing the TPM" on page 376
14.4.3.4 Concluding steps
Ê "Installing the fan box" on page 156
Ê "Reassembling" on page 61