Fujitsu PRIMERGY RX2540 M1 - Re-Installing the Front Panel Module; Concluding Steps; Replacing the Front VGA Connector; Preliminary Steps

RX2540 M1 Upgrade and Maintenance Manual 349
Front panel and external front connectors
13.3.2.4 Re-installing the front panel module
Ê "Removing the front panel card" on page 342
13.3.2.5 Concluding steps
Ê "Installing the fan box" on page 156
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Enabling BitLocker functionality" on page 92
13.3.3 Replacing the front VGA connector
13.3.3.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Ê "Removing the fan box" on page 154
13.3.3.2 Removing the front panel module
Ê "Removing the front panel module" on page 344
13.3.3.3 Removing the front VGA connector
Ê "Removing the front USB3.0 connector" on page 355.
Field Replaceable Unit
(FRU)
Hardware: 15 minutes
Tools: hexagon SW5