Figure 189: Closing socket release lever 1
Ê Close the socket release lever 1 (1) and latch it under the load plate
retention tab (2).
Ê If applicable, install the second processor accordingly.
11.2.3 Concluding steps
Ê "Installing processor heat sinks" on page 307
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Updating or recovering the system board BIOS and iRMC" on page 77
Ê "Switching on the server" on page 67
Ê "Enabling SVOM boot watchdog functionality" on page 86
Ê "Enabling BitLocker functionality" on page 92
To Next Page
Loading...
