Fujitsu PRIMERGY RX2540 M1 - Concluding Steps; Removing the SATA DOM

RX2540 M1 Upgrade and Maintenance Manual 391
System board and components
14.5.2.2 Removing the SATA DOM
Figure 268: Removing the SATA DOM
Ê Firmly remove the SATA DOM out of its connector.
14.5.2.3 Concluding steps
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Verifying system information backup / restore" on page 79