14.3.3.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Locating the defective server" on page 51
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
14.3.3.2 Removing the UFM
Ê "Removing the UFM" on page 370
Ê The UFM spacer remains on the system board.
14.3.3.3 Installing the new UFM
Figure 254: Preparing the new UFM
Ê Remove the nylon screw from the new UFM (1).
Ê Remove the UFM spacer (2).
To Next Page
Loading...
