Fujitsu PRIMERGY RX2540 M1 - Installing TFM to the RAID Controller (if Applicable)

238 Upgrade and Maintenance Manual RX2540 M1
Expansion cards and backup units
9.7.2.2 Installing TFM to the RAID controller (if applicable)
I To connect an FBU to the controller you need a TFM.
Figure 138: Preparing the TFM (A)
Ê Insert the screws into the bolts.
I Leave the distance of the thickness of the TPM between screw head
and bolt.
Ê Push the bolt with the screw in the recesses of the TFM.