Fujitsu PRIMERGY RX2540 M1 - Installing the 4 X 3.5-Inch HDD SAS Backplane 1

128 Upgrade and Maintenance Manual RX2540 M1
Hard disk drives / solid state drives
7.3.1.3 Installing the 4x 3.5-inch HDD SAS backplane 1
Figure 35: Installing the 3.5-inch HDD SAS backplane 1
Ê At a slight angle insert the 3.5-inch HDD SAS backplane 1 between the
punching and the centering pin.
I Take care that the OOB connector will not be damaged!
Ê Fold back the 4x 3.5-inch HDD SAS backplane 1.