Fujitsu PRIMERGY RX2540 M1 - Installing the Front VGA; Re-Installing the Front Panel Module

346 Upgrade and Maintenance Manual RX2540 M1
Front panel and external front connectors
13.3.1.4 Installing the front VGA
Figure 232: Installing the front VGA card
Ê Insert the front VGA card as shown with the longer connector downward.
Figure 233: Mounting the front VGA connector
Ê Fasten the front VGA card with two screws.
13.3.1.5 Re-installing the front panel module
Ê "Removing the front panel card" on page 342