EasyManua.ls Logo

Fujitsu PRIMERGY RX2540 M1 - Removing a FBU; Preliminary Steps

Fujitsu PRIMERGY RX2540 M1
438 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
244 Upgrade and Maintenance Manual
RX2540 M1
Expansion cards and backup units
9.7.3 Removing a FBU
V CAUTION!
Do not throw backup units into the trash can. Batteries must be disposed
of in accordance with local regulations concerning special waste.
For further safety information, please refer to section "Environmental
protection" on page 49.
9.7.3.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Ê Carefully disconnect the FBU cable from the RAID controller (see arrow).
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less

Table of Contents

Other manuals for Fujitsu PRIMERGY RX2540 M1

Related product manuals