Fujitsu PRIMERGY RX2540 M1 - Removing the Front Panel Module; Preparing the Front Panel Module

RX2540 M1 Upgrade and Maintenance Manual 351
Front panel and external front connectors
Ê "Removing the fan box" on page 154
13.4.1.2 Removing the front panel module
Ê "Removing the front panel module" on page 333
13.4.1.3 Preparing the front panel module
Figure 236: Sticking the gaskets
Ê Stick the self-adhesive gaskets on the USB3.0 connector.
Figure 237: Inserting the front USB3.0 connector
Ê Push the front USB3.0 connector into the front panel module.