Fujitsu PRIMERGY RX2540 M1 - Concluding Steps; Preliminary Steps; Removing the SD Card

RX2540 M1 Upgrade and Maintenance Manual 395
System board and components
Ê Connect the mini SD card in the slot "microSD" on the system board.
14.6.1.3 Concluding steps
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Verifying system information backup / restore" on page 79
14.6.2 Removing the SD card
14.6.2.1 Preliminary steps
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less