Fujitsu PRIMERGY RX2540 M1 - Concluding Steps; Removing the External COM1 Connector; Preliminary Steps

268 Upgrade and Maintenance Manual RX2540 M1
Expansion cards and backup units
9.9.1.4 Concluding steps
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Switching on the server" on page 67
Ê "Enabling SVOM boot watchdog functionality" on page 86
9.9.2 Removing the external COM1 connector
9.9.2.1 Preliminary steps
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tool: tool-less