Fujitsu PRIMERGY RX2540 M1 - 11.5 Handling processor heat sinks

RX2540 M1 Upgrade and Maintenance Manual 307
Processors
11.5 Handling processor heat sinks
11.5.1 Preliminary steps
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
11.5.2 Installing processor heat sinks
Figure 196: Standard processor heat sink V26898-B1001-V1
Field Replaceable Unit
(FRU)
if thermal paste is involved
Hardware: 15 minutes
Upgrade and Repair Unit
(URU)
Tool: Phillips PH2 / (+) No. 2 screw driver