Fujitsu PRIMERGY RX2540 M1 - Upgrading SAS; SATA HDD Backplane 2; Preliminary Steps; Installing the 3.5-Inch HDD Backplane 2

RX2540 M1 Upgrade and Maintenance Manual 133
Hard disk drives / solid state drives
Ê "Switching on the server" on page 67
Ê "Enabling BitLocker functionality" on page 92
7.3.2 Upgrading SAS / SATA HDD backplane 2
7.3.2.1 Preliminary steps
Ê "Locating the defective server" on page 51
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Ê "Removing the fan box" on page 154
7.3.2.2 Installing the 3.5-inch HDD backplane 2
Ê "Installing the 4x 3.5-inch HDD SAS backplane 2" on page 131