Fujitsu PRIMERGY RX2540 M1 - 4.5 Reassembling

RX2540 M1 Upgrade and Maintenance Manual 61
Basic hardware procedures
4.5 Reassembling
4.5.1 Installing the air duct
Figure 7: Installing the air duct
Ê Insert the air duct.
I Regard that the air duct engages in the guiding points.
I If there is a FBU installed, follow the procedure that is described in
section "Installing the FBU holder onto the air duct" on page 243.
4.5.2 Closing the server
V CAUTION!
● Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.