Fujitsu PRIMERGY RX2540 M1 - Installing the Rear Cover (Riser Module 1); Installing the Slot Cover (Riser Module 1)

RX2540 M1 Upgrade and Maintenance Manual 195
Expansion cards and backup units
Ê Carefully remove the expansion card from its slot.
9.5.2.4 Installing the rear cover (riser module 1)
Figure 101: Installing the rear cover
Ê Insert the rear cover.
Ê Fasten the rear cover with three screws (see circles).
9.5.2.5 Installing the slot cover (riser module 1)
Figure 102: Installing the slot cover
Ê Insert the slot cover.
Ê Fasten the slot cover with the screw (see circle).