Fujitsu PRIMERGY RX2540 M1 - Preliminary Steps; Removing the Defective ODD; Concluding Steps

RX2540 M1 Upgrade and Maintenance Manual 329
Accessible drives
12.2.3.1 Preliminary steps
Ê Ask the system administrator to eject all remaining backup or optical media
from the backup or optical disk drive before removing it from the server.
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Ê "Removing the fan box" on page 154
Ê "Removing the front panel module" on page 333
12.2.3.2 Removing the defective ODD
Ê "Removing the ODD" on page 325
12.2.3.3 Installing the new ODD
Ê "Installing an ODD" on page 320
12.2.3.4 Concluding steps
Ê "Installing the front panel module" on page 336
Ê "Installing the fan box" on page 156
Ê "Reassembling" on page 61
Ê "Connecting the server to the power source" on page 66
Ê "Enabling BitLocker functionality" on page 92