Ê To temporarily disable or suspend BitLocker, proceed as follows:
For Windows Server 2008 and below:
Ê Click Turn Off BitLocker, and then click Disable BitLocker Drive Encryption.
For Windows Server 2008 R2 and above:
Ê Click Turn Off BitLocker, and then click Suspend BitLocker Drive Encryption.
I In order to determine which features are accessible through the
BitLocker setup wizard, modify the BitLocker Group Policy settings.
For further information on how to disable or suspend BitLocker drive
encryption, please refer to the Microsoft Knowledge Base.
Fujitsu service partners will find additional information (also available in
Japanese) on the Fujitsu Extranet web pages.
5.1.2 Disabling SVOM boot watchdog functionality
The ServerView Operations Manager boot watchdog determines whether the
server boots within a preset time frame. If the watchdog timer expires, the
system will automatically reboot.
5.1.2.1 Viewing boot watchdog settings
Viewing boot watchdog settings in the BIOS
Ê Enter the BIOS.
Ê Select the Server Mgmt menu.
Ê Under Boot Watchdog, you can obtain detailed information about the current
watchdog status, time out intervals and actions that are triggered if
watchdog time outs are exceeded.
I For detailed information on BIOS settings, refer to the corresponding
BIOS Setup Utility reference manual.
Viewing boot watchdog settings in the iRMC web frontend
Ê Enter the ServerView iRMC web frontend.
Ê Select the Server Management menu.
To Next Page
Loading...
