Fujitsu PRIMERGY RX2540 M1 - 9.5 Expansion cards in riser modules (HL)

186 Upgrade and Maintenance Manual RX2540 M1
Expansion cards and backup units
9.5 Expansion cards in riser modules (HL)
9.5.1 Installing an expansion card in riser module 1 (HL)
9.5.1.1 Preliminary steps
Ê "Disabling or suspending BitLocker functionality" on page 69
Ê "Disabling SVOM boot watchdog functionality" on page 70
Ê "Shutting down the server" on page 53
Ê "Disconnecting power cords" on page 54
Ê "Getting access to the component" on page 55
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Software: 5 minutes
Tools: Phillips PH2 / (+) No. 2 screw driver